| Product type | Rotor |
|---|---|
| Version | D6-3 Twister, packaging unit: rotor only |
| Material | Highly wear-resistant rubber compound (sleeve), hard-chrome cast iron (screw) |
| Drive / connection | D pump system, right-hand rotation |
| Main function | Material conveying, mixing function |
| Operating pressure | max. 30 bar |
| Output in l at 200 rpm | 10 l/min |
| Output in l at 400 rpm | 20 l/min |
| Stator diameter | 90 mm |
| Stator length | 273 mm |
The D6-3 Twister rotor is an essential component of plastering and conveying machines, designed for professional use on German and Austrian job sites. As the central element of the D pump system, this rotor is primarily responsible for continuous, homogeneous material conveying. The precise operation of the D6-3 rotor ensures a uniform consistency of plasters and mortars, which is decisive for surface quality and the efficiency of the work process. Construction professionals rely on this technology for reliable processing of a wide range of materials, from gypsum and lime-cement plasters to specialised concrete repair mortars and fire protection mortars.
The key advantage of this D6-3 rotor lies in its material composition and design, engineered for maximum wear resistance. The combination of a sleeve made of a highly wear-resistant rubber compound and a screw made of hard-chrome cast iron results in a significantly longer service life compared with standard versions. This not only reduces the need to procure spare parts but also cuts machine downtime, which means direct cost savings on the job site. Its robust properties allow operation at a maximum pressure of 30 bar and ensure a constant output of 10 l/min at 200 rpm or 20 l/min at 400 rpm, even under abrasive conditions such as when processing materials with a grain size of up to 3 mm.
This rotor is explicitly designed and optimised for the right-hand rotating D pump system, which enables efficient compaction and conveying of building materials. With a stator diameter of 90 mm and a stator length of 273 mm, the D6-3 rotor is perfectly matched to a range of common plastering machines, including PFT G4, PFT G5, PFT Ritmo XL, PFT Swing L and PlasterOne No.1. Its ability to handle a wide spectrum of pumpable materials such as reinforcing mortar, lime-cement plaster, adhesive mortar, dry clay plaster and lightweight plaster makes it a versatile tool for stucco workers, plasterers and renovation contractors in Switzerland, Austria and Germany. The maintenance-free design underlines the focus on practical functionality and reliability. Distributed through specialist building trade dealers.
At a glance:
Features & benefits:
| Feature | Specification |
|---|---|
| Product type | Rotor |
| Version | D6-3 Twister, packaging unit: rotor only |
| Material | Highly wear-resistant rubber compound (sleeve), hard-chrome cast iron (screw) |
| Drive / connection | D pump system, right-hand rotation |
| Main function | Material conveying, mixing function |
| Machine compatibility | PFT G4, PFT G5, PFT Ritmo XL, PFT Swing L, PlasterOne No.1 |
| Operating pressure | max. 30 bar |
| Output in l at 200 rpm | 10 l/min |
| Output in l at 400 rpm | 20 l/min |
| Stator diameter | 90 mm |
| Stator length | 273 mm |
| Max. grain size | 3 mm |
Parts for the same machine — all in one inquiry.
We advise you personally on application, matching parts and lead time — and check before quoting that everything fits your machine.