
The suction-control primer is a ready-to-use, easy-to-apply primer for plastering work indoors and outdoors. It prevents plasters from drying out too quickly ("burning") on highly absorbent substrates such as aerated concrete, masonry, sand-lime brick or concrete. This significantly reduces the risk of shrinkage cracks. Properties Colour: yellowish Ready to use Solvent-free Suitable for rolling, brushing or spraying Application and consumption The substrate must be dry, load-bearing and free of grease, oil and dust. If necessary, the primer can be adjusted with a small amount of water. Apply with a paintbrush, brush, roller or spray unit. Consumption is approx. 150–200 ml/m², depending on the absorbency and nature of the substrate. The maximum permissible dilution must not be exceeded. After drying, a slight glossy film may form on the surface. Surfaces not to be treated must be carefully covered. Before applying plaster, the primed surface must dry through for 1–3 days. Do not apply at temperatures below +5 °C.
We advise you personally on application, matching parts and lead time — and check before quoting that everything fits your machine.